It appears egress shaping is working, but ingress is far below the shaped value..
See part of config that sets the shaping..
Code: Select all
Flags: I - invalid
# NAME SWITCH INGRESS-RATE EGRESS-RATE STORM-RATE
0 sfp1-core-switch switch1 10
1 sfp2 switch1 158.0Mbps 158.0Mbps 10
2 sfp3 switch1 525.0Mbps 525.0Mbps 10
3 sfp4 switch1 158.0Mbps 158.0Mbps 10
4 sfp5 switch1 525.0Mbps 525.0Mbps 10
5 sfp6 switch1 55.0Mbps 55.0Mbps 10
6 sfp7 switch1 100
7 sfp8-castle switch1 525.0Mbps 525.0Mbps 10
8 ether1 switch1 100
9 switch1-cpu switch1 1
egress shaping works great.. ingress shaping on 525Mbps produces around 250Mbps.