Hi all,
I have a Mikrotik HAPac3 which i use as my main router, and have a problem bridging the IPTV VLAN.
The setup is as follows:
- Ether1 is the WAN side, regular internet comes in untagged, IPTV is on VLAN 188
- Ether2 goes out to the main switch.
- Ether3 goes straight to the first IPTV box.
- Ether4 and Ether5 have computers directly attached.
Internet works fine for all devices in several different VLAN's.
But i have a problem with a second IPTV box that is behind 2 switches.
I have 2 bridges configured, 1 for regular internet access, and 1 for IPTV.
It's the IPTV part i have trouble with, i suspect i did something wrong with bridging, because that second IPTV box is not working.
There is no routing done on my side, i just need them bridged to VLAN188 of the ISP, they handle the rest.
The IPTV bridge has 3 members.
- Ether1 VLAN188
- Ether3 Untagged
- Ether2 VLAN33
That last one, Ether2 VLAN33 goes through a few switches, and ends up untagged at the IPTV box.
The first IPTV box works, the second does not even get an IP address.
What am i doing wrong?, The first box (on Ether3 untagged seems to work fine)
The switches have been thoroughly checked, all VLAN's and pvid's are set correctly.