Community discussions

MikroTik App
 
zsolt
just joined
Topic Author
Posts: 9
Joined: Sat Nov 04, 2017 9:57 am

STP and hello time setting in ROS7

Tue Nov 28, 2023 6:19 pm

I want to use classic STP in ROS7 with hello = 1s, but I can't find this option. This value is between 1..10s, default 2s.
I didn't fount this in the documentation: https://wiki.mikrotik.com/wiki/Manual:S ... e_Protocol

Where can I find this item?
 
holvoetn
Forum Guru
Forum Guru
Posts: 5123
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: STP and hello time setting in ROS7

Tue Nov 28, 2023 6:24 pm

Look on this page:
https://help.mikrotik.com/docs/display/ ... geFirewall

Hello Time (and lots of other STP stuff) is a setting under Bridge Firewall, so it seems.
 
zsolt
just joined
Topic Author
Posts: 9
Joined: Sat Nov 04, 2017 9:57 am

Re: STP and hello time setting in ROS7

Fri Dec 01, 2023 6:15 pm

It's not good for me, because it is an input filter. I want to generate every seconds "STP hello" packets, because this network uses 1s hello time.

For example on Cisco:
configure
spanning-tree hello-time 1
exit

Who is online

Users browsing this forum: No registered users and 9 guests