We have a situation where our 2 edge router is both originating default route in OSPF domain we want to match the gateway and set appropriate distance just
like i shown below is this possible? it was not clear in the documentation how to use the "gw" or can it be used in OSPF context, thanks in advance

/routing filter rule
add chain=ospf-in \
rule="if (protocol ospf && dst-len == 0 && gw 192.168.110.1) {set distance -1; accept}"
rule="if (protocol ospf && dst-len == 0 && gw 192.168.110.2) {set distance -2; accept}"


edit: I solved this using gw==192.168.110.1

BR