Community discussions

MikroTik App
 
jakeman2048
just joined
Topic Author
Posts: 5
Joined: Sun Feb 11, 2024 12:54 am

Getting more than Tx Bias Current via SNMP

Sat Feb 17, 2024 3:46 am

An SNMP walk of 1.3.6.1.4.1.14988.1.1.19.1.1 is below. It seems only the "Tx Bias Current" is populated with a real value.
iso.3.6.1.4.1.14988.1.1.19.1.1.2.1 = STRING: "SFP1"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.2 = STRING: "SFP2"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.3 = STRING: "SFP3"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.4 = STRING: "SFP4"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.5 = STRING: "SFP5"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.6 = STRING: "SFP6"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.7 = STRING: "SFP7"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.8 = STRING: "SFP8"
iso.3.6.1.4.1.14988.1.1.19.1.1.5.1 = Gauge32: 85000
iso.3.6.1.4.1.14988.1.1.19.1.1.5.2 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.3 = Gauge32: 819500
iso.3.6.1.4.1.14988.1.1.19.1.1.5.4 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.5 = Gauge32: 819500
iso.3.6.1.4.1.14988.1.1.19.1.1.5.6 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.7 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.8 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.6.1 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.2 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.3 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.4 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.5 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.6 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.7 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.8 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.7.1 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.2 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.3 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.4 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.5 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.6 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.7 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.8 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.1 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.2 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.3 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.4 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.5 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.6 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.7 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.8 = Gauge32: 0
End of MIB
 
jakeman2048
just joined
Topic Author
Posts: 5
Joined: Sun Feb 11, 2024 12:54 am

Re: Getting more than Tx Bias Current via SNMP

Tue Feb 20, 2024 10:12 pm

This post was supposed to be a reply to viewtopic.php?t=204645&sid=9547d71c501a ... be5e035be0

Whoever approved this post split it off into it's own post for some reason

Who is online

Users browsing this forum: No registered users and 0 guests