Hellou

Just checking when the the 7.13+ is going to get a station roaming feature back ?
Currently scraping all the older hap ac2 wherever we can (with version less then or equal to 7.12)

hap ax2 seems great on the paper... useless in reality

Thank you.

Release notes 7.12
*) wifiwave2 - added station-bridge interface mode;

What do you need that doesn't work then ?

sorry for the late reply

not a station bridge.
Station Roaming
for example on the ac2
/interface wireless set station-roaming=enabled wlan2

on ax2 there is not such thing, thats why we are scraping ac2 mikrotiks

And what should it do ?

If your device moves away, it should "roam" to another AP sending out the same SSID ?
Should still work, I think, if you don't set your channel to a fixed value.

Station-Bridge when used in hap ax2 will roam ? no need to set station-roaming parameter ?

roam i mean roam in 0 to 1 second tops around -71 to -73 signal ?
ROAM ? are you sure ?

Not disconnect , send stuff and connect again that takes like 7 seconds.

Use FT then.
If going over multiple access points, consider adding capsman to the mix.

No problem roaming here between AX3 / AX2 / AX Lite / cAP AX, from/to 2.4GHz and 5GHz radios.

mikrotik is a client, not ap
ap is ruckus (6 r610 in unleashed)

thats why the question when will the ax version support station-romaing parameter.

edit: as far as i know mikrotik does not support ft romaing, only standard "roaming" within 0 - 1 seconds (message , lost connection , roamiing...)
mikrotik cant do ft with other brands

(with version less then or equal to 7.12)

Do you realize that the old wireless driver is still available with 7.13+ and even used by default for hap ac2?

Are your hap ac moving or why I'd this needed? Genuinely interested in the use case.

(with version less then or equal to 7.12)

Do you realize that the old wireless driver is still available with 7.13+ and even used by default for hap ac2?

Was more interested in wifiwave2 , latest and greatest...

Are your hap ac moving or why I'd this needed? Genuinely interested in the use case.

Yes they are moving, they are used as client devices for a robots.