I stumbled accross a weird routing behaviour on my network.
In general my network is:
Mikrotik CCR2004 as internet & VPN router connected to 2x OPNsense which are connected to a Mikrotik CCR2116 as my network router.
As a failover my CCR2004 is also direct to CCR2116 but with higher costs so any traffic would go through my firewall.
Anytime I modify an OSPF setting on OPNsense and reload the process it gets reconnected but no traffic is going through it - it becomes unreachable.
Both Mikrotik routers show that OSPF is connected and exchanged all information (State = Full).
I connected to an OPNsense VM to see what is happending there and FRRs vtysh also show that it's fully exchanged on I can see all routes.
Only ICMP and traceroute is not working:
Code: Select all
PING k8s-1.hks.lan (10.0.22.80): 56 data bytes
92 bytes from 172.16.1.2: Time to live exceeded
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 b660 0 0000 01 01 35e7 172.16.1.2 10.0.22.80
92 bytes from 172.16.1.2: Time to live exceeded
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 ef8c 0 0000 01 01 fcba 172.16.1.2 10.0.22.80
92 bytes from 172.16.1.2: Time to live exceeded
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 cbe3 0 0000 01 01 2064 172.16.1.2 10.0.22.80Currently the only solution is to restart CCR2116 to get everything running again.
Is there a bug somewhere?