What I thought was relevant was the config below.. all ports and switch have l3-hw-offloading=yes EXCEPT for WAN port (#8)
Code: Select all
# mar/22/2023 10:20:20 by RouterOS 7.7
# software id = B69M-MGXU
#
# model = CCR2216-1G-12XS-2XQ
# serial number = HCB0884V4KY
/interface ethernet switch set 0 l3-hw-offloading=yes
/interface ethernet switch port set 8 l3-hw-offloading=no
is there a way to see which specific IPs are hardware routed (other than ip / routes / print and H flag).. because the H flag is not present on 0.0.0.0/0 gateway route and I see traffic going out WAN port and yet it's not passing through queues.
cheers,
Paul