Community discussions

MikroTik App
 
abiadha
just joined
Topic Author
Posts: 2
Joined: Sun Jul 09, 2023 2:44 pm
Location: tz

RB951Ui-2HnD port Running (R- flag) without cable connected to it

Mon Nov 11, 2024 11:29 am

I have RB951 the ports keeps running without cable Ethernet cable connected to it.
I have using Netinstall but not sort it out. What to do to resolve the issue? Image
You do not have the required permissions to view the files attached to this post.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 12861
Joined: Thu Mar 03, 2016 10:23 pm

Re: RB951Ui-2HnD port Running (R- flag) without cable connected to it

Mon Nov 11, 2024 9:03 pm

What to do to resolve the issue?

Throw RB951 in trash can?
 
User avatar
dang21000
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Sat Feb 25, 2023 2:30 pm
Location: France

Re: RB951Ui-2HnD port Running (R- flag) without cable connected to it

Mon Nov 11, 2024 10:44 pm

try clean contact with alcohol... but maybe it's time to change
 
abiadha
just joined
Topic Author
Posts: 2
Joined: Sun Jul 09, 2023 2:44 pm
Location: tz

Re: RB951Ui-2HnD port Running (R- flag) without cable connected to it

Tue Nov 12, 2024 7:37 am

What to do to resolve the issue?

Throw RB951 in trash can?
This is not possible as we have received new package that faced the same thing. Like 5pcs in box
 
jaclaz
Forum Guru
Forum Guru
Posts: 1888
Joined: Tue Oct 03, 2023 4:21 pm

Re: RB951Ui-2HnD port Running (R- flag) without cable connected to it

Tue Nov 12, 2024 12:46 pm

Maybe new package, but from the looks of the one in the picture not new devices.

From the screenshot, ether4 transmits something but doesn't receive anything (and this could be - though I cannot imagine how - some false contact or the like mistaking an empty port for a connected one) but ether2 transmits AND receives *something*, which is not possible, the received packets should come from somewhere.

Post your full configuration of the device, following this:
viewtopic.php?t=203686#p1051720

Check also your log, there could be there something about the connections (link up or down) of the ports.
 
User avatar
karlisi
Member
Member
Posts: 465
Joined: Mon May 31, 2004 8:09 am
Location: Latvia

Re: RB951Ui-2HnD port Running (R- flag) without cable connected to it

Tue Nov 12, 2024 4:03 pm

I believe OP connected computer to ether2 in moment of screenshot, that's why there is tx/rx on it.
I had at least 2 devices with blown out ethernet ports, with the same symptoms. Switch chip itself was OK, only input transformer was damaged.

Who is online

Users browsing this forum: No registered users and 7 guests