Hi Mikrotik developers,
I'm trying to connect a Realtek 2.5G USB ethernet adapter to my new RB5009UG, but I found that the device cannot be identified as an ethernet interface in the system.
Is Realtek RTL8156 not yet supported in ROS7?
I have 2 2G internet connections and I would like to let my second one have the 2.5G connection in the network.
The USB3 port of the RB5009UG should have enough bandwidth for the 2.5G USB ethernet.
Regards,
Koxle
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
I second this question. I know that ROS7 is currently based on kernel 5.6.3 and propoer support for rtl8156 has been added in linux kernel 5.14. Can we expect added support for this card? Or next kernel bump will happen when ROS8 arrives?
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
connect adapter to router, generate supout.rif file and send it to support@mikrotik.com with brief explanation. After that we can add it to RouterOS
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
Thanks for the reply @antonsb. Currently I am going on vacation, but when I am back within one week, I will generate this file.
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
I am also looking forward to RTL8156B 2.5G USB support, did you follow antonsb's instructions?Hi Mikrotik developers,
I'm trying to connect a Realtek 2.5G USB ethernet adapter to my new RB5009UG, but I found that the device cannot be identified as an ethernet interface in the system.
Is Realtek RTL8156 not yet supported in ROS7?
I have 2 2G internet connections and I would like to let my second one have the 2.5G connection in the network.
The USB3 port of the RB5009UG should have enough bandwidth for the 2.5G USB ethernet.
Regards,
Koxle
-
-
mileperhour
just joined
- Posts: 1
- Joined:
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
I did it in July 11th and they said they will work on it and will be available on some next release, so we have to waitI am also looking forward to RTL8156B 2.5G USB support, did you follow antonsb's instructions?Hi Mikrotik developers,
I'm trying to connect a Realtek 2.5G USB ethernet adapter to my new RB5009UG, but I found that the device cannot be identified as an ethernet interface in the system.
Is Realtek RTL8156 not yet supported in ROS7?
I have 2 2G internet connections and I would like to let my second one have the 2.5G connection in the network.
The USB3 port of the RB5009UG should have enough bandwidth for the 2.5G USB ethernet.
Regards,
Koxle
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
I also have sent the support file around the same time and Got the same response as mileperhour.
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
Any good news?
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
I've seen rtl8153 mentioned in release notes of 7.12beta so I checked it, but still no dice. Since 7.12 is already in rc, we will have to wait to at least 7.13 I guess...
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
Hi Guys,
I have upgraded my hap Ax3 to 7.12rc4, but it is still not recognized as an Ethernet port.
Did anyone else test it?
I have upgraded my hap Ax3 to 7.12rc4, but it is still not recognized as an Ethernet port.
Did anyone else test it?
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
As I wrote, we probably should not expect RTL8156 support in 7.12 as only RTL8153 was added. Maybe we will see it in 7.13.
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
Sorry,
I misread RTL8153 as RTL8156; I realized it after commenting but couldn't delete my comment.
Thank you.
I misread RTL8153 as RTL8156; I realized it after commenting but couldn't delete my comment.
Thank you.
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
Hello,
Can we expect RTL8156 to be added in foreseable future? I have SUP-121523 and SUP-126539 reported and these two issues combined cause me to use RB5009 in 1Gbe mode even though I pay my ISP each month good chunk of money for 2Gbe connection I cannot use. RB5009 itself was not cheap. But issues I reported during last 6 months remain unresolved and questions raised through both support panel and here on forums remain unanswered (I asked about it in beta release topics of 7.13 or 7.14). It's getting to a point where I am willing to cancel my subscription and/or switch to a different router just because of this issue, because from my perspective, I bought quite premium router + service which is basically unsupported.
Can we expect RTL8156 to be added in foreseable future? I have SUP-121523 and SUP-126539 reported and these two issues combined cause me to use RB5009 in 1Gbe mode even though I pay my ISP each month good chunk of money for 2Gbe connection I cannot use. RB5009 itself was not cheap. But issues I reported during last 6 months remain unresolved and questions raised through both support panel and here on forums remain unanswered (I asked about it in beta release topics of 7.13 or 7.14). It's getting to a point where I am willing to cancel my subscription and/or switch to a different router just because of this issue, because from my perspective, I bought quite premium router + service which is basically unsupported.
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
I contacted support myself as well for this topic, and Sergejs from the support requested a supout file.Hello,
Can we expect RTL8156 to be added in foreseable future? I have SUP-121523 and SUP-126539 reported and these two issues combined cause me to use RB5009 in 1Gbe mode even though I pay my ISP each month good chunk of money for 2Gbe connection I cannot use. RB5009 itself was not cheap. But issues I reported during last 6 months remain unresolved and questions raised through both support panel and here on forums remain unanswered (I asked about it in beta release topics of 7.13 or 7.14). It's getting to a point where I am willing to cancel my subscription and/or switch to a different router just because of this issue, because from my perspective, I bought quite premium router + service which is basically unsupported.
I sent it yesterday.
Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?
is it possible to use the Realtek Nic 2,5 gigabit usb adapter on RB5009 or HaP Ax3 devices now?