Community discussions

MikroTik App
 
piku
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 51
Joined: Sat Feb 10, 2018 10:59 am

is RB5009 support cable test?

Thu Dec 02, 2021 5:46 am

As the title says.
 
piku
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 51
Joined: Sat Feb 10, 2018 10:59 am

Re: is RB5009 support cable test?

Thu Jan 13, 2022 10:10 am

Try to break out of the no-reply T_T
 
fragtion
Member Candidate
Member Candidate
Posts: 269
Joined: Fri Nov 13, 2009 10:08 pm
Location: Cape Town, South Africa

Re: is RB5009 support cable test?

Thu Jan 13, 2022 9:39 pm

The command runs, and it provides a link status. But no "cable-pairs" output, which is what I presume you're looking for.... in which case you'll need to wait for an official reply from MikroTik support team. It works on my hAP ac though, so the function is definitely implemented in ROSv7. Hopefully just a driver issue of sorts
[admin@router1] > /interface/ethernet/cable-test numbers=2
    name: ether3
  status: link-ok
-- [Q quit|D dump|C-z pause]
 
HYBRIDbeing
just joined
Posts: 1
Joined: Sun May 22, 2022 6:47 pm

Sun May 22, 2022 7:01 pm

Seeing the same functionality with my RB2011UiAS-2HnD-IN (r3, RouterOS v6.47.9). Web interface shows a "Cable Pairs" section, but it's empty. Wiki doesn't say anything about version of "cable-test" with limited functionality.
Last edited by HYBRIDbeing on Sun May 22, 2022 7:25 pm, edited 1 time in total.
 
PhilB
just joined
Posts: 21
Joined: Tue Jun 05, 2012 10:00 pm

Re: is RB5009 support cable test?

Wed Jan 22, 2025 3:22 pm