Hi,
I am wondering if there is a way to tally the number of clients conntected to multiple access points.
i have 3 access points. I am able to get the total number of clients on each access point using the following...
clients: [oid("1.3.6.1.4.1.21013.1.2.12.1.1.1.4.1")]
172.16.0.3
172.16.0.4
172.16.0.5
Is there a way to collect all the clients and add them to a total?
Re: get total number of client on multiple access points
using the dude in charts create a data source like this
in code something like this
round((oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.31","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.32","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.33","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.34","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.35","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.41","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.42","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.43","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.44","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.45","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.46","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.47","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.21","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.22","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.23","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.31","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.32","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.33","v2-public"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.51","test"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.53","test"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.55","test"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.56","test")))
then create a chart using that data source
in code something like this
round((oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.31","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.32","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.33","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.34","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.35","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.41","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.42","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.43","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.44","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.45","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.46","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.151.47","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.21","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.22","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.23","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.31","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.32","v2-public"))+(oid("1.3.6.1.4.1.14988.1.1.1.4.0","5","300","192.168.89.33","v2-public"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.51","test"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.53","test"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.55","test"))+(oid("1.3.6.1.4.1.171.10.37.40.2.1.3.3.4.1.1.2.1","5","300","192.168.151.56","test")))
then create a chart using that data source
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 1 guest