Community discussions

MikroTik App
 
olivernz
just joined
Topic Author
Posts: 3
Joined: Wed Aug 13, 2014 12:17 am

NetInstall or bricked RB2011UAS-2HnD-IN

Thu Mar 01, 2018 5:24 am

Hi

So I haven't used my Mikrotik in a while. Since then the network changed and I can't just hook it up because it would have clashed. So I thought the thing to do was to reset it to factory and re-install.
So I did and now when it boots it won't allow me to connect to any Ethernet ports and shows no WiFi. The little screen comes up and works. I have also tried NetInstall and pulled the newest RouterOS on it. That worked fine but it still has the same behaviour.

What's going on??? Is it bricked? Am I missing something here? I don't have a serial cable for it (I have a FTDI tho) so can't see the console.

Hope someone can help!
Cheers Oliver
 
haik01
Member
Member
Posts: 404
Joined: Sat Mar 23, 2013 10:25 am
Location: Netherlands

Re: NetInstall or bricked RB2011UAS-2HnD-IN

Thu Mar 01, 2018 9:26 pm

After a Netinstall the router is completely blank. So no DHCP, no IP etc....

Try to connect by MAC address in Winbox.
 
olivernz
just joined
Topic Author
Posts: 3
Joined: Wed Aug 13, 2014 12:17 am

Re: NetInstall or bricked RB2011UAS-2HnD-IN

Fri Mar 02, 2018 2:31 am

Thanks!! That was exactly the tip I needed and that wasn't clear from the instructions. All back and working now.
After a Netinstall the router is completely blank. So no DHCP, no IP etc....

Try to connect by MAC address in Winbox.
 
Fafode
just joined
Posts: 3
Joined: Mon Mar 05, 2018 4:28 pm

Re: NetInstall or bricked RB2011UAS-2HnD-IN

Mon Mar 05, 2018 4:35 pm

salut je peux avoir la configuration complète de l'antenne mikrotik

Who is online

Users browsing this forum: amt, Kraken2k and 27 guests