Good day,
I have a newbie question. I have a RB750. How can i access our Local Area Webpage (192.168.1.119)?
My ether 1 & 2 are connected to our ISP and ether 5 (192.168.88.0/24) all our workstation are connected to ether 5 and we have another existing network in ether 5 (192.168.1.0/24).. I tried to set routes but i cannot ping 192.168.1.0/24 network..

Sorry for my bad English.

Hope you may help me. Thank you.

If you have both networks on same interface, you don't need any additional routes. You can see that those static routes you added are not active. As long as devices in both subnets have this router as their default gateway and you don't block communication using firewall, it should work. If it doesn't, you'll have to share more info.

salut, j'ai un petit soucis comment faire un simple queu avec les limites pour un debutant

salut, j'ai un petit soucis comment faire un simple queu avec les limites pour un debutant

Hello,

This forum is meant to be English only. You'll get warned if you don't respect this rule (j'en sais quelque chose!).

Also, your question is totally off topic. Start a new post.

Thanks

Sent from Tapatalk

Good day,
I have a newbie question. I have a RB750. How can i access our Local Area Webpage (192.168.1.119)?

Code: Select all

 0 A S  0.0.0.0/0                          192.168.1.1               1
 1   S  0.0.0.0/0                          192.168.254.254           1
 2 A S  0.0.0.0/0                          192.168.1.1               1
 3   S  0.0.0.0/0                          192.168.254.254           2
 4 ADC  192.168.1.0/24     192.168.1.2     ether1                    0
 5   S  192.168.1.0/24     192.168.88.13   ether5                    1
 6 ADC  192.168.88.0/24    192.168.88.1    ether5                    0
 7   S  192.168.88.0/24    192.168.1.254   ether5                    1

My ether 1 & 2 are connected to our ISP and ether 5 (192.168.88.0/24) all our workstation are connected to ether 5 and we have another existing network in ether 5 (192.168.1.0/24).. I tried to set routes but i cannot ping 192.168.1.0/24 network..

Sorry for my bad English.

Hope you may help me. Thank you.

Judging by your routing table, you're added statu routes that are way baaad. Why do you have 292.168.1.0 on ether1 and are routing the same subnet to an ip through ether5.

Your 2nd static route is also weird.

Can you please explain what you're trying to do with these static routes??


Sent from Tapatalk