Community discussions

MikroTik App
just joined
Topic Author
Posts: 1
Joined: Mon Oct 04, 2021 11:12 pm

RB5009 not able to factory reset

Mon Oct 04, 2021 11:27 pm

Hey everyone,

I just got my RB5009, pretty psyched to set it up. I was playing around with some settings (from Fedora 34 were I was able to connect via ip). As one does, I messed up the settings pretty bad and can no longer connect to the device.

I've tried resetting the device (pull the power, hold the reset button while I plug it in and then wait until I get a flashing light on the SFP cage) and trying to connect again via port 1 over TCP/IP but I am getting 'Destination Host Unreachable. Here's some additional config details:

$ip a
9: enp10s0u2u1u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 3c:e1:a1:d0:9f:7f brd ff:ff:ff:ff:ff:ff
inet brd scope global noprefixroute enp10s0u2u1u2
valid_lft forever preferred_lft forever
inet6 fe80::d877:1309:d45:4c20/64 scope link noprefixroute
valid_lft forever preferred_lft forever

$ip route
default via dev enp10s0u2u1u2 proto static metric 20100 dev enp10s0u2u1u2 proto kernel scope link src metric 100

Who is online

Users browsing this forum: Ahrefs [Bot], Google [Bot], mcisar, Rhoos and 8 guests