Community discussions

MikroTik App
 
User avatar
AlphaJoe
just joined
Topic Author
Posts: 1
Joined: Mon Oct 04, 2021 3:09 am

How do I power the RBM11G from the hAP ac3 PoE Out in LAN port 5

Tue Oct 05, 2021 6:06 am

I need help to configure the Mikrotik hAP ac3 PoE Out Lan port 5 to a WAN.

I have tried these steps:
Go to Interface > Interface List: Change WAN to ether5, Press OK

Go to Bridge > Ports: Take ether5 off and add ether1

Go to IP > DHCP Client: Change it from ether1 to ether5
Both my RBM11G and the hAP AC3 are on RouterOS 7.1rc4. Currently the RBM11G has a Quectel EM160R-GL and it connects to AT&T without any problems. What I need is to power it from the hAP ac3's PoE out LAN ether5 Port5, but I cannot seem to change the LAN Port 5 to a WAN, I have tried the above steps and seems like I'm missing something because the WAN keeps defaulting back to ether1 port 1 on the hAP AC3.

Any help or suggestions are appreciated, once I get this configured the RBM11G will be out in an external antenna, being powered by the hAP ac3 PoE out port5, that is my plan. Thank you

Who is online

Users browsing this forum: No registered users and 13 guests