Community discussions

MikroTik App
 
anil
newbie
Topic Author
Posts: 42
Joined: Sun Feb 26, 2017 5:48 pm
Location: Nepal
Contact:

Facebook Photos are not loading

Sat Feb 03, 2018 6:52 pm

On my network some customers are facing problems with facebook where photos are not loading?
 
blackbox100
newbie
Posts: 48
Joined: Thu Mar 10, 2016 2:20 am

Re: Facebook Photos are not loading

Sat Feb 03, 2018 8:50 pm

I had the same issue, and disabled “allow Remote requests” under ip - dns

That fixed it for me

Regards
Carsten Larsen
 
john231
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Wed Aug 08, 2018 12:11 pm

Re: Facebook Photos are not loading

Sat Oct 09, 2021 9:24 pm

Remote requests are enabled on my setup but having the same problem. Did you ever solve the issue?
 
User avatar
nichky
Forum Guru
Forum Guru
Posts: 1280
Joined: Tue Jun 23, 2015 2:35 pm

Re: Facebook Photos are not loading

Sun Oct 10, 2021 7:14 am

to me sounds like mtu issues.
Packet sniffer will help us to diagnostic the issues
 
john231
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Wed Aug 08, 2018 12:11 pm

Re: Facebook Photos are not loading

Fri Oct 22, 2021 3:41 pm

Did a small packet capture with wireshark, i do see some retransmissions and out-of-order messages there.

My up-to-date network layout can be found in this forum post as well: viewtopic.php?f=13&t=177322&p=870924#p870924

I already went over the MTU rates for the LHGG and the APs: Actual MTU is 1500 everywhere on all interfaces wifi + eth + lte. However on the LHGG the ether1 interface has L2 of 1600 and for lte it does not show at all and for every wifi interface (on the APs) the L2 is 1600 but the ethernet interfaces have a L2 MTU of 1598.

Any ideas?

This problem is not persistent it comes and goes.

I have also heard that on the LHGG the sim card pins are very loose and can cause some weird hickups in the network. However i have not seen anything in the logg for a while. It did go out at some point and point blank said that card is not inserted after a couple of tries inserting it back and cleaning it i managed to get it working. Also i have not seen any guides on how to fix the pins on LHGG. Maybe that can cause something as well, i have noticed that when looking at the lte interface the RSSI value comes and goes although the RSRP value itself is pretty stable around -52 dBm
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 105 guests