Community discussions

MikroTik App
 
garbear
just joined
Topic Author
Posts: 4
Joined: Mon Jul 29, 2013 6:44 pm
Location: Prince George, BC Canada
Contact:

SPF Between RB 5009 & HEX POE

Wed Oct 27, 2021 6:24 pm

Hi, I am trying to connect a RB5009 SPF 1.5G SM to a HEX POE SPF 1.5SM. I tried Auto Negotiate (10/100/1000) and without (1G). With does nothing, without connects for a couple of seconds and then disconnects.
Any help would be appreciated.
 
mada3k
Member
Member
Posts: 479
Joined: Mon Jul 13, 2015 10:53 am
Location: Sweden

Re: SPF Between RB 5009 & HEX POE

Wed Oct 27, 2021 6:38 pm

Whats 1.5G ?

Some SFPs only works with auto-nego disabled and 1Gbps.
CCR/CRS/hEX/wAP • Ansible • NetXMS
 
garbear
just joined
Topic Author
Posts: 4
Joined: Mon Jul 29, 2013 6:44 pm
Location: Prince George, BC Canada
Contact:

Re: SPF Between RB 5009 & HEX POE

Thu Oct 28, 2021 1:00 am

Sorry, I have installed S-31DLC20D, its a 1.5gig DDMSPF 20KM 1310mm in both devices.
 
garbear
just joined
Topic Author
Posts: 4
Joined: Mon Jul 29, 2013 6:44 pm
Location: Prince George, BC Canada
Contact:

Re: SPF Between RB 5009 & HEX POE

Fri Oct 29, 2021 7:07 pm

I have two RB5009's, I factory defaulted both and connected FIbre SPF's. They connected within seconds and I was able to pass traffic.
I then have factory defaulted an RB5009 and a HEXPOE and connected them, No Joy. I have tried all Auto-Negotiation and Non-Negotiation scenarios. The closest I have come is setting both to Non-Negotiation, both will link. However both will only Transmit, no Receive traffic.

Who is online

Users browsing this forum: Semrush [Bot] and 29 guests