Community discussions

MikroTik App
 
bborovac
just joined
Topic Author
Posts: 5
Joined: Fri Jun 02, 2017 1:31 pm

css326 sfp problem

Fri Jun 02, 2017 1:56 pm

i have a problem connecting css326-24g-2s (firmware 2.2) to crs212-1g-10s-1s (firmware 6.39.1) using mikrotik spf modules (mikrotik S-31DLC20D)

link is up on both sides but devices does not sees each other no matter what i try --- over copper ethernet everything work ok!

same modules work when i interconnect two crs12-1g-10s-1s+in ( firmware 6.39.1 & 6.40rc15) or two css326-24g-2s+rm (firmware 2.2)

does anyone expirience the same problem ?
branimir
 
User avatar
pukkita
Trainer
Trainer
Posts: 3051
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: css326 spf problem

Fri Jun 02, 2017 2:20 pm

From https://wiki.mikrotik.com/wiki/MikroTik ... lity_table
CCR1016-12S-1S+ / CRS212-1G-10S-1S+ -- SFP+1 interface does not work on any other link speed than 10G (does not support 1.25G fiber optic transceivers)
Could this be the reason? Which SFP port are you using?

Possible solutions:

1.- Try any but the SFP+ port on the 212 to link with the other switches if you want to keep using the S-31DLC20D
2.- Use 10G https://routerboard.com/SplusDA0001, https://routerboard.com/SplusDA0003 10G link between both SFP+.
3.- If former DACs (1 and 3 meters respectively) fall short for your scenario, use S+31DLC10D on the SFP+
 
bborovac
just joined
Topic Author
Posts: 5
Joined: Fri Jun 02, 2017 1:31 pm

Re: css326 sfp problem

Fri Jun 02, 2017 2:35 pm

i'm using original mikrotik modules supported per table inserted in spf not spf+ slots ...
 
User avatar
pukkita
Trainer
Trainer
Posts: 3051
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: css326 sfp problem

Fri Jun 02, 2017 2:44 pm

link is up on both sides but devices does not sees each other no matter what i try
what do you mean exactly with doesn't see? no ping?

If so, I'm afraid it looks as is L3 what's failing, not the SFP (L2) link... could you post an export, and /interface monitor captures at each switch on the problem scenario?
 
bborovac
just joined
Topic Author
Posts: 5
Joined: Fri Jun 02, 2017 1:31 pm

Re: css326 sfp problem

Fri Jun 02, 2017 2:49 pm

well there is no ping beetween css326 and crs212 ... also ip neighbours on crs212 does not show anything on specified spf ...

the config is plain and simple - tried with bridging and ip direct on interface but both does not work ...

switch with default config - ip 192.168.88.1 - spf module on css326 connected to spf on crs212 with ip 192.168.88.2 (directly on interface or on bridge with
interface bound to that bridge) but ping does not pass neither i can see mac address from crs ...
 
User avatar
pukkita
Trainer
Trainer
Posts: 3051
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: css326 sfp problem

Sat Jun 03, 2017 2:03 pm

FYI: SwOS 2.3 has been released, see viewtopic.php?f=21&t=122214
SwOS version 2.3 released
http://www.mikrotik.com/download

What's new in v2.3:

*) fixed CRS317: make 10G links more stable;
*) fixed "Allow From VLAN" on untagged packets with correct default vlan id;
*) LACP: fixed unstable aggregate link problem when partner had short retransmit timer;
*) CSS326 & CRS317: made 1Gb fiber SFP module work with auto negotiation;
*) CSS106: do not VLAN tag RSTP packets;
 
bborovac
just joined
Topic Author
Posts: 5
Joined: Fri Jun 02, 2017 1:31 pm

Re: css326 sfp problem

Mon Jun 05, 2017 10:38 am

seems that new firmware v2.3 fixed this problem ! :-)
 
gigx205
just joined
Posts: 6
Joined: Wed Nov 02, 2011 11:43 am

Re: css326 sfp problem

Fri Nov 12, 2021 9:17 am

Hi!
I have 3 switches CSS326-24G-2S+RM (firmware 2.13) with Mikrotik SFP modules pairs S-35LC20D/S-53LC20D.
LINK:
SWITCH A (S-53LC20D plugged in SFP1) ------> SWITCH B (S-35LC20D plugged in SFP1)
SWITCH C (S-53LC20D plugged in SFP1)------->SWITCH B (S-35LC20D plugged in SFP2)

Link between SW C to SW B works when I set Auto Negotiation=OFF and set speed to 1G on both sides.
1GB speed is set on SFP1 and SFP2 port on SW B.
1GB speed is set on SFP1 port on SW C.
1GB speed is set on SFP1 port on SW A

When I enable SFP1 port on SW A to establish the link with SW B, link betweeen SW C and SW B is not working...

Who is online

Users browsing this forum: No registered users and 9 guests