Community discussions

MikroTik App
 
wookielinux
just joined
Topic Author
Posts: 2
Joined: Wed Dec 06, 2017 5:42 am

CCR1072-1G-8S+ throughput issue

Wed Nov 24, 2021 5:51 am

We are seeing a problem with our CCR1072;s on 3 seperate networks now and was wondering if it was normal and we have the upgrade to CHR

Here is what I have a CCR1072
------------------------------------------
sfp1 = 10G link with HE.net
sfp2 = 10G link with DOCSIS network
sfp3-7 = N/C
sfp8 = 10G link to crs326-24g - Servers and Hosting

Here is what I am seeing
-----------------------------------------
- During peak hours we seem to limited on the sfp2 to ~2.5 to ~3Gps with 10G as the link speed
- During same peak hours I can still do a Bandwidth test to another Tik on 10G through sfp1 for a 3-4Gbps (total 7-8Gbps with traffic from sfp2)
- Modems behind sfp2 cannot get full speeds during peak hours even with plenty of room left on spf1.
- We see 0 errors and 0 drops on all interfaces.
- CCR1072 - CPU is max ~ 4 to 10%

What we have configured...
------------------------------------------
- only firewall rules are block forwarding for an address list
- No queues are setup (removed for testing)
- 2 bridges, VPN and PUBLIC
- Nat is only for VPN bridge
- No mangle rules
- only Routes besides default for
/19 direct to sfp2 partner ip
/24 direct to sfp8 local switch / servers
- We have disabled wireless, hotspot . ipv6, mpls packages
- Connection tracking is on (we use limited nat)
- Connection count average is ~ 180000 max


Our question is:
Should a CCR1072 be able to forward more than 3Gbps given the above setup?
The partner connected to spf2 states they are not QOSing or limiting us in any way. Yes as soon as we go past 2.5Gbps we start seeing dropouts and endusers do not get full bw.


Regards
-lw
 
wookielinux
just joined
Topic Author
Posts: 2
Joined: Wed Dec 06, 2017 5:42 am

Re: CCR1072-1G-8S+ throughput issue

Thu Nov 25, 2021 6:00 pm

Bump
 
texmeshtexas
Member Candidate
Member Candidate
Posts: 151
Joined: Sat Oct 11, 2008 11:17 pm

Re: CCR1072-1G-8S+ throughput issue

Fri Nov 26, 2021 5:44 pm

what does the tool>profile indicate?

Are you running with IPv4 Fasttrack Active, not Fast Path. We found that helps a lot.
In IP settings we enable Allow FastPath but due to fw rules, that does not get used.
Added fw filter rule on forward chain with conn state est,rel Action fastrack connection
 
User avatar
Maggiore81
Trainer
Trainer
Posts: 562
Joined: Sun Apr 15, 2012 12:10 pm
Location: Italy
Contact:

Re: CCR1072-1G-8S+ throughput issue

Sat Nov 27, 2021 9:00 pm

If you dont share the conf here (hide-sensitive) it is very hard to help you

Who is online

Users browsing this forum: CJWW, orionren and 44 guests