Community discussions

MikroTik App
  4. RouterOS
  5. General

VLAN & Trunk Configuration

Post Reply
 
MrMaregaTech
just joined
Topic Author
Posts: 5
Joined: Tue Apr 09, 2019 1:09 pm

VLAN & Trunk Configuration

Mon Dec 06, 2021 5:55 pm

Hello everybody ! So I have a little question about my configuration.

I have a D-Link DGS-3120 switch wich have VLAN21 configured on.
All of my other routers has the same VLAN and I can access them by this VLAN.
The problem right now is my Mikrotik router (CCR1036-8G basede on 6.47), I want to access him too by this VLAN so I configured a trunk port on the D-Link and connect it to my MK.

How should I configure my MK to access him ? I have tried Bridge VLAN etc and the thing is the MK and D-link can ping each other but from my laptop i can't.
Any help is welcomed :)
Thanks guys
Top
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19323
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:
Contact anav

Re: VLAN & Trunk Configuration

Mon Dec 06, 2021 6:34 pm

Confusing, is the MT device the router in this picture?
If so, where are the vlans then created (ip pool, ip address, dhcp server, dhcp server network)
Top
 
dmitris
Member Candidate
Member Candidate
Posts: 127
Joined: Mon Oct 09, 2017 1:08 pm

Re: VLAN & Trunk Configuration

Mon Dec 06, 2021 10:17 pm

Hello everybody ! So I have a little question about my configuration.

I have a D-Link DGS-3120 switch wich have VLAN21 configured on.
All of my other routers has the same VLAN and I can access them by this VLAN.
The problem right now is my Mikrotik router (CCR1036-8G basede on 6.47), I want to access him too by this VLAN so I configured a trunk port on the D-Link and connect it to my MK.

How should I configure my MK to access him ? I have tried Bridge VLAN etc and the thing is the MK and D-link can ping each other but from my laptop i can't.
Any help is welcomed :)
Thanks guys
Hi.

Step 1: add vlan under interfaces settings
Step 2: assign ip addr to this vlan under ip address settings.
Step 3: if there firewall configured already, you need check it and make appropriate rule for input chain.

That's all.
Top
 
MrMaregaTech
just joined
Topic Author
Posts: 5
Joined: Tue Apr 09, 2019 1:09 pm

Re: VLAN & Trunk Configuration

Wed Dec 08, 2021 1:07 pm

Thank you guys for your answers and you were right it was the firewall that was blocking the traffic.
Now everything works fine !

Have a good day :)
Top
Post Reply

Who is online

Users browsing this forum: deatras, haung05 and 89 guests
  4. RouterOS
  5. General