is there any info, should dynamic mesh working between 7.1 and 6.49?
after upgrade one of my devices to 7.1, i always see in logs on both devices following: "connected, signal strength -68, is AP, wants WDS"
thanks.
Code: Select all
/interface mesh
add name=mesh1
/interface mesh port
add interface=ether1 mesh=mesh1
add interface=wlan1 mesh=mesh1
/interface wireless
set [ find default-name=wlan1 ] mode=ap-bridge radio-name=mAPlite ssid=\
wifi-wds wds-default-bridge=mesh1 wds-mode=dynamic-mesh \
wireless-protocol=802.11