I have 2 provisionings enabled in my CAPsMAN, one for 2.4GHZ and one for 5GHZ. So I disabled the 5GHZ one, provisioned all my AP's. Now my IOT device worked fine. Reenabled the 5GHZ and did another provision but no 5GHZ network for me. When looking at one of the AP's it doesn't seem to know what SSID to use:
2.4GHZ works fine. I did not change anything in my config, just a disable->provision->enable->provision.
Any ideas?
Code: Select all
/caps-man interface
add disabled=no l2mtu=1600 mac-address=64:D1:54:B4:6C:72 master-interface=none name=cap23 radio-mac=64:D1:54:B4:6C:72 radio-name=64D154B46C72
add disabled=no l2mtu=1600 mac-address=64:D1:54:BF:A3:D6 master-interface=none name=cap24 radio-mac=64:D1:54:BF:A3:D6 radio-name=64D154BFA3D6
add disabled=no l2mtu=1600 mac-address=64:D1:54:B4:6C:71 master-interface=none name=cap27 radio-mac=64:D1:54:B4:6C:71 radio-name=64D154B46C71
add disabled=no l2mtu=1600 mac-address=74:4D:28:B8:FE:1B master-interface=none name=cap28 radio-mac=74:4D:28:B8:FE:1B radio-name=744D28B8FE1B
/caps-man datapath
add bridge=bridge-local client-to-client-forwarding=yes local-forwarding=yes name=dp-bridge-local
add bridge=bridge-secure client-to-client-forwarding=no local-forwarding=no name=dp-bridge-secure
/caps-man security
add authentication-types=wpa2-psk disable-pmkid=no encryption=aes-ccm name=my-ssid passphrase=xx
add authentication-types=wpa2-psk comment="xx" disable-pmkid=no encryption=aes-ccm name=my-other-ssid passphrase="xx"
/caps-man configuration
add channel.band=2ghz-g/n country=netherlands datapath=dp-bridge-local hide-ssid=no installation=indoor mode=ap name="my-ssid - 2.4GHZ" security=my-ssid ssid=my-ssid
add channel.band=5ghz-a/n/ac country=netherlands datapath=dp-bridge-local hide-ssid=no installation=indoor mode=ap name="my-ssid - 5GHZ" security=my-ssid ssid=my-ssid
add channel.band=5ghz-n/ac country=netherlands datapath=dp-bridge-secure installation=indoor mode=ap name="my-other-ssid - 5GHZ" security=my-other-ssid ssid=my-other-ssid
add channel.band=2ghz-g/n country=netherlands datapath=dp-bridge-secure installation=indoor mode=ap name="my-other-ssid - 2.4GHZ" security=my-other-ssid ssid=my-other-ssid
add channel.band=5ghz-n/ac country=netherlands datapath=dp-bridge-local installation=indoor mode=ap name=my-ssid-for-5ghz-only security=my-ssid ssid=my-ssid-for-5ghz-only
/caps-man manager
set enabled=yes package-path=/pub upgrade-policy=suggest-same-version
/caps-man manager interface
set [ find default=yes ] forbid=yes
add disabled=no interface=bridge-local
/caps-man provisioning
add action=create-dynamic-enabled hw-supported-modes=ac,an master-configuration="my-ssid - 5GHZ" slave-configurations="my-other-ssid - 5GHZ,my-ssid-for-5ghz-only"
add action=create-dynamic-enabled hw-supported-modes=g,gn master-configuration="my-ssid - 2.4GHZ" slave-configurations="my-other-ssid - 2.4GHZ"
2x WAP AC
1x WAP (only 2.4GHZ)