I'm a little bit ashamed to ask such a simple Question, as I'm working as a Fulltime Networkengineer at an ISP, but this is my first Mikrotik device and the configuration philosophy is quite different from our Nokia-NE's, that I'm used to.
Anyway, I have a CRS317-1G-16S+ runnig RouterOS 6.49beta11 configured as a simple VLAN-Switch, but I'm getting a Warning that I can't resolve.
Code: Select all
port with pvid added to untagged group which might cause problems, consider adding a seperate VLAN entry
Any advice is appreciated. My config es quite simple so posting all of it:
Code: Select all
/interface bridge
add frame-types=admit-only-vlan-tagged ingress-filtering=yes name=bMain vlan-filtering=yes
add name=bMgnt
/interface ethernet
set [ find default-name=sfp-sfpplus1 ] l2mtu=9216 mtu=9216 name=01-Jizo-1
set [ find default-name=sfp-sfpplus2 ] l2mtu=9216 mtu=9216 name=02-Jizo-2
set [ find default-name=sfp-sfpplus3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full l2mtu=9216 mtu=9216 name=03-Ophois
set [ find default-name=sfp-sfpplus4 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full l2mtu=9216 mtu=9216 name=04-Raijin
set [ find default-name=sfp-sfpplus5 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full l2mtu=9216 mtu=9216 name=05-Wurzel
set [ find default-name=sfp-sfpplus6 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full l2mtu=9216 mtu=9216 name=06-Stamm1
set [ find default-name=sfp-sfpplus7 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full l2mtu=9216 mtu=9216 name=07-Inari
set [ find default-name=sfp-sfpplus16 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full l2mtu=9216 mtu=9216 name=16-Uplink
set [ find default-name=ether1 ] name=Mgnt
set [ find default-name=sfp-sfpplus8 ] disabled=yes
set [ find default-name=sfp-sfpplus9 ] disabled=yes
set [ find default-name=sfp-sfpplus10 ] disabled=yes
set [ find default-name=sfp-sfpplus11 ] disabled=yes
set [ find default-name=sfp-sfpplus12 ] disabled=yes
set [ find default-name=sfp-sfpplus13 ] disabled=yes
set [ find default-name=sfp-sfpplus14 ] disabled=yes
set [ find default-name=sfp-sfpplus15 ] disabled=yes
/interface bonding
add mode=802.3ad mtu=9216 name=LAG-Jizo slaves=01-Jizo-1,02-Jizo-2
/interface bridge port
add bridge=bMain frame-types=admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=03-Ophois pvid=20
add bridge=bMain frame-types=admit-only-vlan-tagged ingress-filtering=yes interface=16-Uplink
add bridge=bMgnt hw=no interface=Mgnt
add bridge=bMain frame-types=admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=LAG-Jizo pvid=20
add bridge=bMain frame-types=admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=05-Wurzel pvid=30
add bridge=bMain frame-types=admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=07-Inari pvid=20
add bridge=bMain frame-types=admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=04-Raijin pvid=20
/interface bridge vlan
# port with pvid added to untagged group which might cause problems, consider adding a seperate VLAN entry
add bridge=bMain tagged=16-Uplink untagged=LAG-Jizo,03-Ophois,04-Raijin,05-Wurzel,07-Inari vlan-ids=20,30
/ip address
add address=192.168.1.29/24 interface=bMgnt network=192.168.1.0
/ip dhcp-client
add comment=defconf disabled=no
/system clock
set time-zone-name=Europe/Berlin
/system leds
add leds=user-led type=flash-access
/system routerboard settings
set boot-os=router-os