I notice that in RouterOS 7.x.. the UI includes a column for "Bridge Port"
How do I get this listed in terminal?
Neither of these seems to include it in the results:
Code: Select all
/ip/dhcp-server/lease/print
/ip/dhcp-server/lease/print detailGetting Bridge Port from DHCP Leases in Terminal
Hi,
I notice that in RouterOS 7.x.. the UI includes a column for "Bridge Port"
How do I get this listed in terminal?
Neither of these seems to include it in the results:
Seems useful to help me get which CAP interface a particular DHCP client is associated with.
I notice that in RouterOS 7.x.. the UI includes a column for "Bridge Port"
How do I get this listed in terminal?
Neither of these seems to include it in the results:
You do not have the required permissions to view the files attached to this post.
Re: Getting Bridge Port from DHCP Leases in Terminal
This is clearly a bug on 7.1.1 and 7.2.rc1. Please report this to support@mikrotik.com
I did try to find it and its not in termial.
"Bridge Port" that are shown in Winbox are not to find in CLI
I did try to find it and its not in termial.
Code: Select all
:put [/ip dhcp-server/lease get *1 ]
active-address address-lists block-access dhcp-option-set insert-queue-before queue-type src-mac-address
active-client-id agent-circuit-id blocked disabled last-seen radius status
active-mac-address agent-remote-id client-id dynamic lease-time rate-limit use-src-mac
active-server allow-dual-stack-queue comment expires-after mac-address routes value-name
address always-broadcast dhcp-option host-name parent-queue server Code: Select all
:put [/ip dhcp-server/lease get *1]
.id=*1;
active-address=172.16.1.254;
active-client-id=1:0:50:79:22:68:3;
active-mac-address=00:50:79:22:68:03;
active-server=dhcp1;
address=172.16.1.254;
address-lists=;
blocked=false;
client-id=1:0:50:79:22:68:3;
dhcp-option=;
disabled=false;
dynamic=true;
expires-after=00:07:24;
host-name=VPCS1;
last-seen=2m36s;
mac-address=00:50:79:22:68:03;
radius=false;
server=dhcp1;
status=bound
Re: Getting Bridge Port from DHCP Leases in Terminal
Same here, hap ac3 with 7.1.2 and half of leases are without a bridge port in DHCP Server > Leases
Who is online
Users browsing this forum: No registered users and 9 guests