Can you help me with any clues on the 5g configuration?
I was dealing with a very poor wifi performance on 5G (I don't even care for 2.4 since it's only used in my house for IoT stuff). After some experimentation, I finally managed to find good settings that deliver a good signal coverage, download/upload speed (almost the same I get via cable).
The problem now is related to stability. Connections work fine, but I noticed every time I'm in a meeting via Teams - for instance - suddenly connection drop, and I need to wait up to 10s, and it starts to communicate again. Then I decided to troubleshoot and ping both the DNS and Mikrotik. When the connection drops, I start losing packages between my computer and the router, making me believe the issue is Wifi instead of the internet.
Have any of you folks faced such an issue before and have any advice or idea?
Here are my seetings today:
Code: Select all
# feb/09/2022 12:47:38 by RouterOS 7.1.1
# software id = XLZG-LBM0
#
# model = RouterBOARD 962UiGS-5HacT2HnT
# serial number = 8A77087C856C
/caps-man channel
add band=2ghz-b/g/n control-channel-width=20mhz frequency=2437 name=channel2g-6 tx-power=15
add band=5ghz-n/ac control-channel-width=20mhz extension-channel=XXXX frequency=5220,5210,5270,5310 name=\
channel5g
add band=2ghz-b/g/n control-channel-width=20mhz frequency=2462 name=channel2g-11 tx-power=15
add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=XXXX frequency=5190 name=changel5g-40
add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=XXXX frequency=5230 name=channel5g-44
add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=XXXX frequency=5270 name=channel5g-54
/interface bridge
add admin-mac=CC:2D:E0:C4:F4:AD auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n channel-width=20/40mhz-XX country=brazil disabled=no distance=\
indoors frequency=auto installation=indoor mode=ap-bridge ssid=AB-HOME2G wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-n/ac channel-width=20/40/80mhz-eCee country=no_country_set disabled=no \
frequency=5765 frequency-mode=manual-txpower mode=ap-bridge ssid=AB-HOME5G-TOP wireless-protocol=802.11 \
wps-mode=disabled
/caps-man datapath
add bridge=bridge client-to-client-forwarding=yes local-forwarding=yes name=capsmans-datapath
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-vivo use-peer-dns=yes user=cliente@cliente
/caps-man security
add authentication-types=wpa2-psk name=capsman-security
/caps-man configuration
add channel=channel2g-6 country=brazil datapath=capsmans-datapath distance=indoors hide-ssid=no installation=\
indoor mode=ap multicast-helper=full name=def-wifi-config security=capsman-security ssid=AB-HOME2G
add channel=channel5g country=brazil datapath=capsmans-datapath hide-ssid=no installation=any mode=ap \
multicast-helper=full name=def-wifi5g-config security=capsman-security ssid=AB-HOME5G
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface lte apn
set [ find default=yes ] ip-type=ipv4
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" mode=dynamic-keys \
supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=10.25.10.100-10.25.10.254
/ip dhcp-server
add address-pool=dhcp interface=bridge name=defconf
/caps-man access-list
add action=accept allow-signal-out-of-range=10s disabled=yes interface=all signal-range=-80..120 ssid-regexp=""
add action=reject allow-signal-out-of-range=10s disabled=yes interface=all signal-range=-120..-81 ssid-regexp=""
/caps-man manager
set ca-certificate=auto certificate=auto enabled=yes
/caps-man manager interface
set [ find default=yes ] forbid=yes
add disabled=no interface=bridge
/caps-man provisioning
add action=create-enabled master-configuration=def-wifi5g-config radio-mac=CC:2D:E0:C4:F4:B2
add action=create-enabled master-configuration=def-wifi-config radio-mac=CC:2D:E0:C4:F4:B3
add action=create-enabled master-configuration=def-wifi-config radio-mac=2C:C8:1B:C3:16:7E
add action=create-enabled master-configuration=def-wifi5g-config radio-mac=2C:C8:1B:C3:16:7F
/interface bridge port
add bridge=bridge comment=defconf ingress-filtering=no interface=ether2
add bridge=bridge comment=defconf ingress-filtering=no interface=ether3
add bridge=bridge comment=defconf ingress-filtering=no interface=ether4
add bridge=bridge comment=defconf ingress-filtering=no interface=ether5
add bridge=bridge comment=defconf ingress-filtering=no interface=sfp1
add bridge=bridge comment=defconf ingress-filtering=no interface=wlan1
add bridge=bridge comment=defconf ingress-filtering=no interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ip settings
set max-neighbor-entries=8192
/ipv6 settings
set disable-ipv6=yes max-neighbor-entries=8192
/interface detect-internet
set internet-interface-list=WAN lan-interface-list=LAN wan-interface-list=WAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=pppoe-vivo list=WAN
/interface wireless cap
set bridge=bridge caps-man-addresses=127.0.0.1 discovery-interfaces=bridge interfaces=wlan1,wlan2
/ip address
add address=10.25.10.1/24 comment=defconf interface=bridge network=10.25.10.0
/ip dhcp-client
add comment=defconf disabled=yes interface=ether1
/ip dhcp-server lease
add address=10.25.10.30 client-id=SuiteLuz2 mac-address=D8:F1:5B:C9:78:CC server=defconf
add address=10.25.10.20 comment="Home Automation Server" mac-address=DC:A6:32:6B:6C:09 server=defconf
add address=10.25.10.33 mac-address=A0:20:A6:11:94:88 server=defconf
add address=10.25.10.31 mac-address=D8:F1:5B:C8:DA:DE server=defconf
add address=10.25.10.34 mac-address=A0:20:A6:03:D5:E7 server=defconf
add address=10.25.10.35 mac-address=60:01:94:E3:B5:81 server=defconf
add address=10.25.10.37 mac-address=CC:50:E3:E8:9E:D7 server=defconf
add address=10.25.10.38 mac-address=50:02:91:57:06:A3 server=defconf
add address=10.25.10.36 mac-address=50:02:91:5C:E0:FB server=defconf
add address=10.25.10.39 mac-address=CC:50:E3:E8:A1:87 server=defconf
add address=10.25.10.3 client-id=1:d0:3:df:6b:8:be mac-address=D0:03:DF:6B:08:BE server=defconf
add address=10.25.10.101 client-id=1:b8:c6:aa:7a:c1:23 comment=\
"Start IP reservation for other devices (TVs, TV Box, Console, etc.)" mac-address=B8:C6:AA:7A:C1:23 server=\
defconf
add address=10.25.10.40 mac-address=D8:F1:5B:E0:76:9A server=defconf
add address=10.25.10.29 comment="Start IP reservation for Tasmota Devices" mac-address=F4:CF:A2:16:73:CA server=\
defconf
add address=10.25.10.41 mac-address=60:01:94:FB:F6:6C server=defconf
add address=10.25.10.50 mac-address=84:CC:A8:9C:26:5E server=defconf
add address=10.25.10.2 client-id=1:2c:c8:1b:c3:16:7e mac-address=2C:C8:1B:C3:16:7E server=defconf
/ip dhcp-server network
add address=10.25.10.0/24 comment=defconf dns-server=8.8.8.8,8.8.4.4 gateway=10.25.10.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=10.25.10.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related \
hw-offload=yes
add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN
/ip upnp
set enabled=yes
/ip upnp interfaces
add interface=bridge type=internal
add interface=pppoe-vivo type=external
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name="MikroTik Router"
/system routerboard settings
set auto-upgrade=yes
/tool graphing interface
add
/tool graphing resource
add
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN