Hi everyone, I have a Mikrotik PPPoE server that handles about 1000 connections (we are an ISP)
To some of our customers we provide a backup line with different technology from the main one, for example the main one in FTTH, backup via FWA / Wireless.
Both lines authenticate to our PPPoE Server
In the routing table a DAC route with weight 0 is created with dst-address = IP Client and on the interface the dynamically created PPPoE interface.
The problem is that both sessions are on distance = 0. I would like the main one to be distance = 0 and the secondary one with a greater distance, in this way the backup line is used only in case of failure of the primary.
With both distances set to 0 the traffic passes from the line that authenticated last, so I would run the risk of sending the traffic to the customer on the backup line
We use the same username / password on both sessions so that we can also backup any Static IPs / Network Subnets / 29
The PPPoE Server for customer auth relies on our Radius Server
Some advice?