Community discussions

MikroTik App
 
bublikoff
just joined
Topic Author
Posts: 8
Joined: Sat Apr 30, 2016 10:07 pm

How to passthrough LTE with ipv4 and ipv6

Thu Mar 31, 2022 2:12 pm

How to passthrough LTE with ipv4 and ipv6?
IPv4 works OK ... but can not manage to work both ipv4 nd ipv6 the same time
There is no even IP type ipv4ipv6
ROS 7.2rc7
 
aesmith
Member Candidate
Member Candidate
Posts: 264
Joined: Wed Mar 27, 2019 6:43 pm

Re: How to passthrough LTE with ipv4 and ipv6

Thu Mar 31, 2022 5:12 pm

If you remove the passthrough configuration, does the LTE interface receive an IPv6 address?
 
bublikoff
just joined
Topic Author
Posts: 8
Joined: Sat Apr 30, 2016 10:07 pm

Re: How to passthrough LTE with ipv4 and ipv6

Sun Apr 03, 2022 6:23 pm

If you remove the passthrough configuration, does the LTE interface receive an IPv6 address?
Yes, my mobile operator does support ipv6 ... the main problem is to get ipv6 and ipv4 the same time ...
Current router firmware ROS v.7.2rc7
 
tdw
Forum Guru
Forum Guru
Posts: 1843
Joined: Sat May 05, 2018 11:55 am

Re: How to passthrough LTE with ipv4 and ipv6

Sun Apr 03, 2022 7:16 pm

Does the carrier provide dual-stack IPv4 and IPv6 at the same time, or do they provide IPv6 with IPv4 tunneling support (e.g. DS-Lite, Lw4o6, 464XLAT, NAT64/DNS64 or MAP-T/E) which requires the client device to implement the their end of the tunnel?

Also you will likely get a /64 IPv6 address so you can only use one subnet.
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: How to passthrough LTE with ipv4 and ipv6

Sun Apr 03, 2022 7:51 pm

There is no even IP type ipv4ipv6
What do you mean ?
In the APN menu there is an IP type field where you can select both IPv4 and IPv6.
After that you enable the passthrough feature...
And ofcorse in the LTE general tab you should select the correct APN profile.
 
gabeluci
just joined
Posts: 11
Joined: Thu Jun 11, 2020 2:07 am
Location: Canada
Contact:

Re: How to passthrough LTE with ipv4 and ipv6

Mon Jul 18, 2022 4:58 pm

What do you mean ?
In the APN menu there is an IP type field where you can select both IPv4 and IPv6.
After that you enable the passthrough feature...
And ofcorse in the LTE general tab you should select the correct APN profile.
I'm curious about this too. In WinBox, in the APN config, if I have IP Type set to "Auto" and try to enable Passthrough, I get an error message saying, "Passthrough can not be used with ipv6-interface! (6)"
 
Busily5562
just joined
Posts: 8
Joined: Tue Aug 30, 2022 6:28 pm

Re: How to passthrough LTE with ipv4 and ipv6

Wed Aug 31, 2022 4:23 pm

What do you mean ?
In the APN menu there is an IP type field where you can select both IPv4 and IPv6.
After that you enable the passthrough feature...
And ofcorse in the LTE general tab you should select the correct APN profile.
I'm curious about this too. In WinBox, in the APN config, if I have IP Type set to "Auto" and try to enable Passthrough, I get an error message saying, "Passthrough can not be used with ipv6-interface! (6)"
Did you manage to get it sorted ?
 
gabeluci
just joined
Posts: 11
Joined: Thu Jun 11, 2020 2:07 am
Location: Canada
Contact:

Re: How to passthrough LTE with ipv4 and ipv6

Wed Aug 31, 2022 6:51 pm

Did you manage to get it sorted ?
No. Honestly, I just gave up on IPv6 for now and disabled it.
 
hifigraz
just joined
Posts: 6
Joined: Tue Aug 25, 2020 11:01 am

Re: How to passthrough LTE with ipv4 and ipv6

Thu May 11, 2023 5:13 pm


No. Honestly, I just gave up on IPv6 for now and disabled it.
Same here, it's really sad, that this does not work.

Who is online

Users browsing this forum: No registered users and 50 guests