Community discussions

MikroTik App
 
marcosvales
just joined
Topic Author
Posts: 5
Joined: Wed Oct 18, 2017 5:02 am

CCR 1009 does not initialize. no netinstall

Sun Dec 08, 2019 2:26 am

CCR keeps restarting, I can't start netinstall. I can't use netinstall using RS232 serial cable

Press any key within 2 seconds to enter setup..

loading kernel... OK
setting up elf image... OK
jumping to kernel code
Could not mount ubifs filesystem: Invalid argument
opendir: No such file or directory
opendir: No such file or directory
ERROR: no system package found!
Kernel panic - not syncing: Attempted to kill init!

Starting stack dump of tid 1, pid 1 (init) on cpu 8 at cycle 11907065189
frame 0: 0xfffffff70051fc00 dump_stack+0x0/0x20 (sp 0xfffffe007eedfc08)
frame 1: 0xfffffff700518b98 panic+0x168/0x398 (sp 0xfffffe007eedfc08)
frame 2: 0xfffffff700053a78 do_exit+0x1c8/0xd48 (sp 0xfffffe007eedfcb0)
frame 3: 0xfffffff700054740 do_group_exit+0xf0/0x1e8 (sp 0xfffffe007eedfd78)
frame 4: 0xfffffff700054858 __wake_up_parent+0x0/0x18 (sp 0xfffffe007eedfdb0)
frame 5: 0xfffffff700520958 handle_syscall+0x210/0x2d0 (sp 0xfffffe007eedfdc0)
<syscall while in user mode>
frame 6: 0x8e648 0x8e648 (sp 0x7fdbf980)
Stack dump complete
Rebooting in 1 seconds..Resetting chip and restarting.
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: CCR 1009 does not initialize. no netinstall

Sun Dec 08, 2019 6:22 pm

I think you should press CTRL + E to enter setup...
And yes i do remember correctly...
https://wiki.mikrotik.com/wiki/Manual:Etherboot

So, maybe you missed that step ?
 
mrjalali
just joined
Posts: 2
Joined: Mon Sep 17, 2012 7:58 am

Re: CCR 1009 does not initialize. no netinstall

Fri May 15, 2020 11:49 am

I have same problem with ccr 1009
Can you help me?
You do not have the required permissions to view the files attached to this post.
 
stanelie
newbie
Posts: 30
Joined: Sun Jun 03, 2012 9:32 pm

Re: CCR 1009 does not initialize. no netinstall

Fri Apr 08, 2022 6:05 pm

I have the same issue, same error message on the serial console.

This started after I tried to upgrade the firmware from within winbox.

Did you ever solve it?
 
r00t
Long time Member
Long time Member
Posts: 672
Joined: Tue Nov 28, 2017 2:14 am

Re: CCR 1009 does not initialize. no netinstall

Fri Apr 08, 2022 6:24 pm

Try running backup routerboot (there usually is extra button or pad on PCB to force loading of backup routerboot).
It's possible this is bug in current version of routerboot.
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: CCR 1009 does not initialize. no netinstall

Sat Apr 09, 2022 1:37 pm

If you press the reset button before applying power to the device then the backup bootloader will load...

Who is online

Users browsing this forum: No registered users and 20 guests