I just made an upgrade to ROS7.2.1 with my bgp-configuration. So far everything looks good, all settings are correctly migrated.
Only thing thats a bit tricky:
When Router1 wants to announce a route to his neighbor, there is a routing filter set, which changes the bgp-med.
Konfig on ROSv6.49:
Konfig on upgraded ROSv7.2.1:/routing filter
add action=accept chain=secondary-out set-bgp-med=110
/routing filter rule
add chain=secondary-out disabled=no rule="set bgp-med 110; accept "
On Router2, when I check the received routes from Router1, there is noc MED set in status-field.
What could here be the issue?
Thanks and best regards.