I just have upgraded my RB450Gx4 to ROS 7.1.5
...and for couple of days trying to figure out why plain and simple aut with user/pass for wifi Ent (PEAP) is not working...
router has multiple vlans ( my case vlan 80 [192.168.80.3] has direct connection to unifi AP)
Code: Select all
[admin@core-router] > /user-manager/export
# model = RB450Gx4
/user-manager profile
add name=prof1 name-for-users=prof1 starts-when=first-auth
/user-manager user group
add inner-auths=peap-mschap2 name=tsa outer-auths=pap,chap,mschap1,eap-peap,eap-mschap2
/user-manager user
add group=tsa name=test1
add group=tsa name=test2 shared-users=2
/user-manager
set enabled=yes
/user-manager router
add address=192.168.80.4 name=UAP-AC-LR
/user-manager user-profile
add profile=prof1 user=test1
add profile=prof1 user=test2
router log:
Code: Select all
13:36:58 manager,debug >>> rx Access-Request from [192.168.80.4]:56227, id: 117
13:36:58 manager,debug <<< tx Access-Challenge to [192.168.80.4]:56227, id: 117
13:36:58 manager,debug >>> rx Access-Request from [192.168.80.4]:56227, id: 118
13:36:58 manager,debug <<< tx Access-Challenge to [192.168.80.4]:56227, id: 118
13:36:58 manager,debug >>> rx Access-Request from [192.168.80.4]:56227, id: 119
13:36:58 manager,debug <<< tx Access-Challenge to [192.168.80.4]:56227, id: 119
13:37:02 manager,debug >>> rx Access-Request from [192.168.80.4]:56227, id: 120
13:37:02 manager,debug <<< tx Access-Challenge to [192.168.80.4]:56227, id: 120
13:37:02 manager,debug >>> rx Access-Request from [192.168.80.4]:56227, id: 121
13:37:02 manager,debug <<< tx Access-Challenge to [192.168.80.4]:56227, id: 121
I have a Synology NAS with radius enabled, now, if I configure unifi AP to use Synology, everything is working flawless...