I currently have a network with vlans setup for neighbour MKTs. Each neighbour different vlan.
Example: R1 - R2 - R3
R1 has vlan 1 for R2, vlan 2 for R3
R2 has vlan 3 for R1, vlan 4 for R3
R3 has vlan 5 for R1, vlan 6 for R2
and so on...
Each vlan is assigned an IP address of x.x.x.x/29, 1 for local MKT, 1 for remote MKT, 2 for the link between them (wireless PTP).
I am however receiving these errors pretty much constantly (could vary between MKT depending on number of OSPF neighbours).
I've manually added all VLAN interfaces for neighbourship in OSPF with network type as point to point and that's it. The OSPF costs are set pretty much in the best possible way that I could think of in my head and it is running very smoothly apart from the fact that I'm getting bombarded with these errors.
One very strange thing about this, is that, MKTs with only 1 neighbour will not have ANY of these errors appear, ever. If I add one more neighbour, the error will appear in both interfaces.
Any clue on why's this happening?
P.S. I've checked all IP addresses and made sure they are correctly set so no other MKT has the same one with another one or any link in regards to that.