Hi,
Enabling the NTP Server on CHR requires installing the adittional [ntp] package.
After installing this package, the NTP Client is missing some of the features available in the basic package.
NTP servers cannot be choosed by name, only by IP address. On the Winbox GUI all the diagnostic information is lost.
With extra package enabled:
/system ntp client> print
enabled: yes
mode: unicast
primary-ntp: 64.142.54.22
secondary-ntp: 0.0.0.0
dynamic-servers:
status: started
With base package:
/system ntp client> print
enabled: yes
primary-ntp: 64.142.54.22
secondary-ntp: 0.0.0.0
server-dns-names:
mode: unicast
poll-interval: 16s
active-server: 64.142.54.22
Anyone knoes a workaround for this behaviour?