Model : RB924i-2nD-BT5&BG77 Factory firmware
FYI, the port ifor the BG77 used to be USB, but is now called MODEM and on data/infochannel 2
I tried to find this port change from USB to MODEM in the documentation, but I was not able to find that. Either it does not exist, or I did not look well enough.
PPP info : BG77 : LTE Cat-NB1 gives vodafone directly, but a scan takes ages and does not give any result.
The GPS is on port MODEM and data channel 1, init channel 2
GPS data looks fine, but modem gives a lot of "Modem did not respond", only after reboot is will accept any AT commands.
You can have a quick view on GPS data via /system serial-terminal port=modem channel=1
Next hop : decode HEX from the TG-BT-XX tokens to fetch the temperature only and send over MQTT.
Does anyone have a sample script that extracts this from the hex payload as described in
https://help.mikrotik.com/docs/display/ ... dstructure ? I would prefer to decode the needed data on the knot instead of relying on the target MQTT handler/pipeline.
@mikrotik, if you have a hex decoder, why not add it to the sample script that you provide at
https://help.mikrotik.com/docs/pages/vi ... ithascript ?
Thank you,