Username: bthomehub@btbroadband.com
Password: BT
VLAN: 101
and then a ppooe server to actually finish the connection and assign an ip. This is my config so far the BTO modem lan is plugged into port 20 of the mikrotik.
Here is my NON working config so far please could someone point out where i'm going wrong.
Code: Select all
/interface vlan
add interface=ether20 name=vlan101 vlan-id=101
/interface pppoe-client
add add-default-route=yes dial-on-demand=yes disabled=no interface=vlan101 \
name=pppoe-out1 use-peer-dns=yes user=bthomehub@btbroadband.com
/ip pool
add name=vlan101_pool ranges=10.78.0.1-10.78.0.253
/ip dhcp-server
add address-pool=vlan101_pool interface=vlan101 name=vlan101_dhcp
/ppp profile
set *0 change-tcp-mss=no
/interface pppoe-server server
add disabled=no interface=ether20 service-name=service1
/ip address
add address=10.78.0.254/24 interface=pppoe-out1 network=10.78.0.0
/ip dhcp-server network
add address=10.78.0.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=10.78.0.254 \
netmask=24
/ppp secret
add name=bthomehub@btbroadband.com