Hi all,
This is on a RB5009 running RouterOS 7.2.3.
I made the mistake of creating this route a few times:
Code: Select all
/ip route add check-gateway=none disabled=no distance=2 dst-address="" gateway=10.69.145.161 routing-table=main suppress-hw-offload=no
Code: Select all
/ip route print
However, it shows up in export:
Code: Select all
[admin@MikroTik RB5009] > /ip route export
# may/14/2022 15:27:12 by RouterOS 7.2.3
# software id = xxxxxxxxxxxx
#
# model = RB5009UG+S+
# serial number = xxxxxxxx
/ip route
add check-gateway=none disabled=no distance=2 dst-address="" gateway=10.69.145.161 routing-table=main suppress-hw-offload=no
add check-gateway=none disabled=no distance=2 dst-address="" gateway=10.69.145.161 routing-table=main suppress-hw-offload=no
...
Again:
Code: Select all
/ip route print
Code: Select all
/ip route remove [find where gateway=10.69.145.161]
I also tried rebooting the RB5009 but the routes stay there.
So please help me to delete these routes... Thanks in advance!