Node Red started to load on other computers and then it stopped. This is all after restoring this new configuration. When kids go crazy I keep returning to the old configuration so it is constant back and forth.
I have checked the clock and the time was wrong. Set up the ntp but it would not sync. Checked if I can do the update and noticed: ERROR could not resolve dns name
# may/30/2022 20:26:44 by RouterOS 6.48.6
# software id = 0D1A-DYBK
#
# model = 2011UiAS-2HnD
# serial number =
/interface bridge
add name=bridge1
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 \
use-peer-dns=yes user=something@wba.nbnonline.com.au
/interface wireless
set [ find default-name=wlan1 ] disabled=no mode=ap-bridge ssid=MikroTik \
wireless-protocol=802.11
/caps-man security
add authentication-types=wpa2-psk encryption=aes-ccm name=cap_security
/caps-man configuration
add country=australia datapath.bridge=bridge1 name=cap_config security=\
cap_security ssid=Greetings
add country=australia datapath.bridge=bridge1 name=cap_config_5GHz security=\
cap_security ssid=Greetings5G
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\
dynamic-keys supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.1.200-192.168.1.254
add name=vpn ranges=192.168.89.2-192.168.89.255
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge1 name=dhcp1
/ppp profile
set *FFFFFFFE local-address=192.168.89.1 remote-address=vpn
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,!dude,!tikapp"
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-dynamic-enabled master-configuration=cap_config \
name-prefix=2.4_
add action=create-dynamic-enabled master-configuration=cap_config_5GHz \
name-prefix=5GHz_
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether6
add bridge=bridge1 interface=ether7
add bridge=bridge1 interface=ether8
add bridge=bridge1 interface=ether9
add bridge=bridge1 interface=ether10
add bridge=bridge1 interface=sfp1
add bridge=bridge1 interface=wlan1
/interface l2tp-server server
set enabled=yes use-ipsec=required
/interface list member
add interface=pppoe-out1 list=WAN
add interface=bridge1 list=LAN
/interface pptp-server server
set enabled=yes
/interface sstp-server server
set default-profile=default-encryption enabled=yes
/ip address
add address=192.168.1.1/24 interface=bridge1 network=192.168.1.0
add address=10.1.1.1/24 interface=bridge1 network=10.1.1.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-client
add interface=ether1
/ip dhcp-server lease
...
/ip dhcp-server network
add address=0.0.0.0/24 gateway=0.0.0.0 netmask=24
add address=192.168.1.0/24 gateway=192.168.1.1 netmask=24
/ip firewall filter
add action=fasttrack-connection chain=forward connection-state=\
established,related dst-port=53 protocol=tcp
add action=fasttrack-connection chain=forward connection-state=\
established,related dst-port=53 protocol=udp
add action=accept chain=input comment=icmp protocol=icmp
add action=accept chain=input comment="accept established,related,untracked" \
connection-state=established,related,untracked disabled=yes
add action=accept chain=input comment="allow IPsec NAT" dst-port=4500 \
protocol=udp
add action=accept chain=input comment="allow IKE" dst-port=500 protocol=udp
add action=accept chain=input comment="allow l2tp" dst-port=1701 protocol=udp
add action=accept chain=input comment="allow pptp" dst-port=1723 protocol=tcp
add action=accept chain=input comment="allow sstp" dst-port=443 protocol=tcp
add action=drop chain=input in-interface-list=!LAN
/ip firewall nat
add action=masquerade chain=srcnat comment="masq. vpn traffic" src-address=\
192.168.89.0/24
add action=masquerade chain=srcnat out-interface-list=WAN
/ip upnp
set enabled=yes
/ip upnp interfaces
add interface=bridge1 type=internal
add interface=pppoe-out1 type=external
/lcd interface pages
set 0 interfaces="sfp1,ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8\
,ether9,ether10"
/ppp secret
add name=robs service=l2tp
/system clock
set time-zone-name=Australia/Brisbane
/system ntp client
set enabled=yes server-dns-names=\
0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org,3.pool.ntp.org
/system package update
set channel=long-term
/tool netwatch
add down-script=down host=1.1.1.1 interval=5s up-script=up