Hi,
I have some problems with correct configuration my quite simple network.
I would like to use Mikrotik RB3011 as a DHCP Server and CAPS Manager and what is more important I have different device as a GATEWAY (UTM Firewall).
Is it possible to have capsman not as a gateway to Internet ? Configuration without UTM worked very well, but actually I have problems with WIFI users.
I have attached diagram of network.
Simple describe:
- network without VLANs
- UTM have few addresses on one interface (something like router on a stick)
- UTM routes/or not between subnets
- DHCP relay is set to Mikrotik
- Mikrotik is a DHCP Server for all subnets
- Mikrotik controls wifi networks with capsman and caps connected via LAN
Actually status:
- wired network is working well
- capsman is configured, caps are connected, remote caps are running, wifi networks are running
Main problem is:
Wifi users are connected, getting correct network settings from DHCP Server but they cannot connect to gateway. They can only ping/connect to dhcp server.
It looks like Mikrotik cannot route packets from capsman to gateway.
I can ping from mikrotik 10.0.0.1, but I cannot ping 10.0.1.1 and 10.0.2.1
Mikrotik is set in bridge mode. Is that correct ?
I tried to set "local forwarding", but it caused every user get ip address from wired network.
What can be reasons these kind of behaviour ?
Thank you in advance