Hi,
On RouterOS 7.2.3, i'm haveing trouble setting up an NTP server. As far I can tell, the ntp packets are arriving from the client to the Mikrotik (see log entry below), but it seems like the Mikrotik doesn't do anything (or the packet doesn't reach the ntpd), and I can't get any logging info from the ntpd (see ntp logging settings below)
Any advice?
Regards:
C.
The data/parameters of the systems are shown below.
ip addresses:
ntp client 192.168.226.13
ntp server 192.168.226.1 this ip is binded to a vlan interface.
/system/ntp/server/print
enabled: yes
broadcast: no
multicast: no
manycast: no
broadcast-addresses:
use-local-clock: yes
local-clock-stratum: 5
auth-key: none
/system/ntp/client/print
enabled: yes
mode: unicast
servers: de.pool.ntp.org
freq-drift: -6.156 PPM
status: synchronized
synced-server: de.pool.ntp.org
synced-stratum: 2
system-offset: -0.64 ms
firewall filter:
chain=input action=accept protocol=udp in-interface=all-vlan dst-port=123 log=yes log-prefix="NTP"
log entry:
NTP input: in:vlan-voip out:(unknown 0), src-mac 00:08:5d:32:dd:33, proto UDP, 192.168.226.13:1160->192.168.226.1:123, len 76
ntp logging settings:
/system/logging/print
7 ntp memory
debug
packet