Hi all,
Tell me if I'm being thick, but I can't for the life of me get traffic from a virtual wireless interface to go to a VLAN. Here's my situation:
Ether2 runs my default VLAN (192.168.88.0/24), and VLAN20 (10.20.20.0/24)
I've got 2 SSID's: Main (on wlan1) and Guest (on wlan_VLAN slave to wlan1)
Very simply I want anyone connecting to Guest to go to VLAN20 but nothing that I do makes that happen. The only way I've been getting it to work, is by assigning the VLAN to the wireless interface, which I don't want to do because I want multiple access points to be able to use it. Essentially I think I need the AP to be able to tag its own traffic, and send that traffic over a bridge that acts as the trunk in order to reach VLAN20, so to achieve this I've ste the virtual wlan to use tag VLAN ID 20. I've then added wlan_VLAN to the LAN bridge which has Ether2 in it. I first tried doing it over the bridge without VLAN tagging, and then with. I've tried the dynamic bridge VLAN interface tagging, and tried statically assigning the tagged and untagged ports. Please help!
Its not exactly the same topology but I've tried appropriating this wiki page - https://wiki.mikrotik.com/wiki/Manual:VLANs_on_Wireless no no avail.