Hello!
Do you guys had a problem with a pair of nray that see each other BUT wont establish a link until you reboot the ap nor station side?
I have a link that do that. It works like a charm for 10-15 days, something 2-3 months sometimes few days , then the link goes down. I some cases, I can still scan from the station and I see the ssid, but it wont connect back. The only fixe I found is to reboot the ap or somethime both radios.
WHAT I DID :
I tried to swap radios
Turning off interfaces
different FW
We also changed the AP for a wap60
6.47.10 station and 6.49.6 the ap
We have watchdog setup in the AP. And it reboot now by itself. But now we have to manually reboot the cpe side. It's very weird.
Someone can help me ?
MORE DETAILS :
Stable current at each side, one side is a DC/DC setup with AGM batt and meanwell PSU, the other side (ap side) is a UPS cyberpower 1500va. So we have stable power source.
150M from st to ap, with a good signal well aimed, on channel 4.5 in a clear LOS.
We use this link to transport FTTH modem data to a router.
Layer 2 DIAGRAM :
ISP_modem --- NRAY_AP ----------------------------- 150M ----------------------------- NRAY_ST --- RB4011_routeur.