I am trying to set up a wifi bridge between my ISP's modem/router and the IPTV box also provided by my ISP.
The configuration I'm trying to set up is similar to Bridging Networks with SXT, because in order to work the IPTV box must be on the same network as the modem/router of my ISP. Until now I was using PLC adpatater but the connection is not very stable.
My setup looks like this :
Code: Select all
ISP modem/router <-- eth link --> hAPac3 <-- wireless link --> hAPac2 <-- eth link --> iptv box
I don't filter anything on the firewall of the 2 mikrorik router, the nat is disabled, dhcp sever and client are disabled. See detailled config :
hAPac 3
Code: Select all
[admin@hAPac3] > export hide-sensitive
/interface bridge
add admin-mac=**** auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
country=france disabled=no distance=indoors frequency=auto installation=\
indoor mode=ap-bridge ssid=MikroTik wireless-protocol=802.11 wmm-support=\
enabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX \
country=france disabled=no distance=indoors frequency=auto installation=\
indoor mode=ap-bridge ssid=MikroTik wireless-protocol=802.11 wmm-support=\
enabled
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk management-protection=\
allowed mode=dynamic-keys supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
add bridge=bridge interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.1.3/24 interface=bridge network=192.168.1.0
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes servers=192.168.1.254
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" disabled=yes \
ipsec-policy=out,none out-interface-list=WAN
/routing bfd interface
set [ find default=yes ] disabled=yes
/system identity
set name=hAPac3
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
hAPac 2
Code: Select all
[admin@hAPac2] > export hide-sensitive
/interface bridge
add admin-mac=**** auto-mac=no comment=defconf name=bridge
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk management-protection=allowed mode=dynamic-keys name=client supplicant-identity=""
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-eC country=france disabled=no distance=indoors frequency=2447 \
installation=indoor mode=station-bridge security-profile=client ssid=MikroTik wireless-protocol=802.11 wmm-support=enabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee country=france disabled=no distance=indoors frequency=5580 \
installation=indoor mode=station-bridge security-profile=client ssid=MikroTik wireless-protocol=802.11 wmm-support=enabled
/ip dhcp-server
add interface=bridge name=defconf
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
add bridge=bridge interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.1.2/24 interface=bridge network=192.168.1.0
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes servers=192.168.1.254
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" disabled=yes ipsec-policy=out,none out-interface-list=WAN
/ip route
add distance=1 gateway=192.168.1.254
/routing bfd interface
set [ find default=yes ] disabled=yes
/system identity
set name=hAPac2
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
Would you have an idea to explain this connectivity problem only for the IPTV box?