Thank you for the response. I used that tutorial as an example... and I think I must be close, but whenever I enable vlan-filtering, I can no longer talk to the switch.
Here is my config so far...
[admin@HORSE-FIBER] > export
# jan/02/1970 02:28:38 by RouterOS 6.49.6
# software id = CRT4-3BE1
#
# model = CRS310-1G-5S-4S+
# serial number = HC707QWJ949
/interface bridge
add admin-mac=DC:2C:6E:C6:B9:B6 auto-mac=no comment=defconf name=bridge
/interface vlan
add interface=bridge name=BCYF-ADMIN vlan-id=100
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge comment=defconf ingress-filtering=yes interface=ether1 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp-sfpplus1 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp-sfpplus2 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp-sfpplus3 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp-sfpplus4 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp1 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp2 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp3 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp4 pvid=100
add bridge=bridge comment=defconf ingress-filtering=yes interface=sfp5 pvid=100
/interface bridge vlan
add bridge=bridge comment=BCYF-GUEST tagged=bridge,ether1,sfp1,sfp2,sfp3,sfp4,sfp5,sfp-sfpplus1,sfp-sfpplus2,sfp-sfpplus3,sfp-sfpplus4 vlan-ids=200
add bridge=bridge comment=BCYF-ADMIN untagged=bridge,ether1,sfp1,sfp2,sfp3,sfp4,sfp5,sfp-sfpplus1,sfp-sfpplus2,sfp-sfpplus3,sfp-sfpplus4 vlan-ids=100
/ip address
add address=172.16.42.19/23 interface=BCYF-ADMIN network=172.16.42.0
add address=172.16.42.19/23 interface=bridge network=172.16.42.0
/ip route
add distance=1 gateway=172.16.42.1
/system identity
set name=HORSE-FIBER
/system routerboard settings
set boot-os=router-os
#error exporting /system swos
[admin@HORSE-FIBER] >
Anything obvious I am screwing up? I have the IP address set twice because it doesn't seem to work as just the VLAN interface..
thanks again.
Dan