Community discussions

MikroTik App
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 12:38 pm

Hi All,

I'm having a strange SFP port issue with my CCR-1036-12G-4S router.
As soon as I reboot the router, the SFP port goes down. I manually have to disable and enable the SFP port to work again. The Auto-negotiation is disabled and the speed is set to 1G.

My SFP module details are below:

Vendor: UBNT
Model: UF-RJ45-1G
Vendor Serial: X20062802607


The same SFP module works flawlessly with my RB3011 and RB4011 routers. Is there any workaround for this? Please help.
 
erlinden
Forum Guru
Forum Guru
Posts: 1072
Joined: Wed Jun 12, 2013 1:59 pm

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 12:39 pm

What RouterOS version and firmware are you using?
First the problem, then the solution
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 7512
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 12:42 pm

Have you asked for support on the Ubiquiti Forum or Ubiquiti Support?
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 1:31 pm

What RouterOS version and firmware are you using?
I'm using the latest stable v6.49.6 version.
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 1:32 pm

Have you asked for support on the Ubiquiti Forum or Ubiquiti Support?
This is happening with all SFP modules. Recently tried with ATOP modules as well, but had same result.
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 5:49 pm

I got it working with a simple startup script, which disables and then enables the SFP interface.

But wanted to know if this can be fixed without any scheduler. Thanks for helping
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2113
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 6:28 pm

other end of that link is configured manually at 1g ?
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 10:01 pm

other end of that link is configured manually at 1g ?
The line came from a media converter which auto negotiates to 1G when connected to switch via ethernet cable.
Also, the same link works perfectly with SFP module, when connected to RB3011, 4011.
This is why I'm confused. Is there any settings to be done from the CCR end to have it running without scripts??
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1594
Joined: Fri Aug 10, 2012 6:46 am
Location: Denver, CO USA
Contact:

Re: MikroTik CCR SFP Port Issue

Thu Jun 23, 2022 10:18 pm

This isn't normal behavior for a CCR1036, what version of RouterOS are you running and how old is the CCR?
Global - MikroTik Support & Consulting - English | Español | Serbian | Danish +1 855-645-7684
https://iparchitechs.com/ecosystem/mikr ... consulting mikrotiksupport@iparchitechs.com
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

Re: MikroTik CCR SFP Port Issue

Fri Jun 24, 2022 7:58 am

This isn't normal behavior for a CCR1036, what version of RouterOS are you running and how old is the CCR?
I'm running latest stable version 6.49.6 and the router model is CCR 1036-12G-4S. The router was purchased 7-8 years ago.
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1594
Joined: Fri Aug 10, 2012 6:46 am
Location: Denver, CO USA
Contact:

Re: MikroTik CCR SFP Port Issue

Fri Jun 24, 2022 8:28 am

the router model is CCR 1036-12G-4S. The router was purchased 7-8 years ago.

What is the output of

system health print
Global - MikroTik Support & Consulting - English | Español | Serbian | Danish +1 855-645-7684
https://iparchitechs.com/ecosystem/mikr ... consulting mikrotiksupport@iparchitechs.com
 
mahfuzazam
just joined
Topic Author
Posts: 23
Joined: Sat Aug 08, 2020 7:59 pm

Re: MikroTik CCR SFP Port Issue

Fri Jun 24, 2022 8:30 am

the router model is CCR 1036-12G-4S. The router was purchased 7-8 years ago.

What is the output of

system health print
[M@MikroTik] > system health print
fan-mode: auto
use-fan: main
active-fan: main
cpu-overtemp-check: yes
cpu-overtemp-threshold: 100C
cpu-overtemp-startup-delay: 1m
voltage: 24V
current: 1547mA
temperature: 30C
cpu-temperature: 56C
power-consumption: 37.1W
fan1-speed: 2704RPM
fan2-speed: 2704RPM

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], ctghost, Google [Bot], Scoobyn8, Semrush [Bot] and 35 guests