Hello
Im completely new to MikroTik's and networking in general. I've searched the forum, but need something of a clear answer.
My problem is, that i have 4 identical indsutrial machines which have the exact same IP-addresses. The addresses is like:
192.168.0.2
192.168.0.20
192.168.0.90
I need to accsess all four machine from a SCADA server, with the IP of 172.168.0.1.
Is it possible to connect machine 1 to port 1 on the router, machine 2 on port 2 and so on - and after that use NAT to translate the ip addresses like this:
Machine 1 internal ip : 192.168.0.2 on port 1 - external address: 172.168.0.10
Machine 2 internal ip : 192.168.0.2 on port 2 - external address: 172.168.0.20
.... and so on.
The first thing i am worried about ip-conflicts, but hope it is possible to isolate the ports in som way.
I cannot change the IP-adresses of each machine.
The router im going to use is MikroTik RB2011UiAS-RM Router.