I have spent 2 days watching vids and trying to modify scripts that I have found and being a newbie does not help.
I am attempting to configure a CRS 326 with the following setup:
ether 1: WAN1 DHCP from ISP
ether 2: WAN2 DHCP from ISP
ether 3: to IPfire (Intrusion Detection System) with DHCP 192.168.88.0/24
ether 4: from IPfire DHCP From IPFire
ether 5: CCTV with DHCP Server 192.168.1.0/24
ether 6: NAS with DHCP Server 192.168.2.0/24
ether 7-24: Local LAN with DHCP Server 192.168.0.0/24
I would like WAN1 and WAN 2 to have failover should one link go down. If both are available that their speeds be combined.
WAN 1 and WAN 2 are then passed to ether 3 IPFire which has an intrusion detection system on it. The IPfire box then comes in onto ether 4 as the WAN port for the internal network.
ether 5 (192.168.1.0/24) and 6 (192.168.2.0/24) has internet from ether 4.
From ether 7 onwards DCHP on 192.168.0.0/24 has internet.
Not one of the setups I have tried has worked. This is for my homelab which I want to use to learn but if I can not get it to work I guess that would be it.
Any help please