I noticed a problem with my configuration: when the data SIM is not connected to the internet, the MikroTik does not assign an IP address via DHCP to the machine connected to the ethernet port 1.
Is this common with the MikroTik or does it depend on how we have configured it? Can you help me?
Code: Select all
# jun/29/2022 23:11:04 by RouterOS 7.3
# software id = 3PWC-R7A2
#
# model = RBwAPR-2nD
/interface bridge
add name=bridge1 protocol-mode=none
/interface lte
set [ find ] allow-roaming=no band="" name=lte1 network-mode=3g,lte
/interface ethernet
set [ find default-name=ether1 ] arp=proxy-arp
/interface wireless
set [ find default-name=wlan1 ] ssid=MikroTik
/interface lte apn
set [ find default=yes ] apn=xxx.vodafone.it authentication=pap ip-type=ipv4 name=LTE use-network-apn=no user=LTERES_111943D
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp-pool ranges=192.168.88.101-192.168.88.199
/ip dhcp-server
add address-pool=dhcp-pool interface=bridge1 name=dhcp
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=wlan1
/ip settings
set tcp-syncookies=yes
/ip address
add address=192.168.88.1/24 interface=bridge1 network=192.168.88.0
add address=82.100.200.100/24 interface=ether1 network=82.100.200.0
/ip dhcp-server lease
add address=192.168.88.2 client-id=1:14:49:bc:26:d7:XX comment="Router One" mac-address=14:49:BC:26:D7:32 server=dhcp
/ip dhcp-server network
add address=192.168.88.0/24 dns-server=1.1.1.1,8.8.8.8,8.8.4.4 gateway=192.168.88.1 netmask=24 ntp-server=193.204.114.232,193.204.114.233
/ip dns
set servers=8.8.8.8,1.1.1.1
/ip firewall nat
add action=masquerade chain=srcnat comment="Navigazione Rete Lan" out-interface=lte1 src-address=192.168.88.0/24
add action=dst-nat chain=dstnat comment="Router One" dst-port=44063 protocol=tcp to-addresses=192.168.88.2 to-ports=44063
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www address=93.175.000.000/32,192.168.0.0/16
set ssh disabled=yes
set api disabled=yes
set winbox address=93.175.000.000/32,192.168.0.0/16
set api-ssl disabled=yes
/system ntp client
set enabled=yes
/system ntp client servers
add address=193.204.114.232
add address=193.204.114.233
/tool graphing interface
add
/tool sms
set port=lte1