I am a very amatuer user for mikrotik devices so I may be missing a simple setting somewhere when configuring these aps.
i have a hex POE router and 2 cap ac waps.
the router is set to be caps manager, and i have tried setting up the aps fallowing this youtube video from mikrotik.
https://www.youtube.com/watch?v=taQ70m0DVYA
the aps seem to work correctly, but I cannot select any channel width besides 20mhz. I have separated the 5ghz and 2.4ghz radio configurations within capsman with no change in results.
in the 5ghz spectrum my neighborhood is very empty so i would like to take advantage of the largest channel width available to me.
setting up one of the aps individually allows me to select the 20/40/80 channel width selection and my speed tests almost double in rate from 130ish to 230ish mbps.
I am also interested in cutting my 2.4ghz signal down to 5 or 10 mhz channels in order to cut through the noise on that radio and i cannot do that either.
currently the best i can get with capsman is:
Current channel:
2442/20-Ce/gn
5180/20-Ceee/ac