I'm needing help with configuring CAPsMan. I have configured my hEX as the CAPsMAN server and have set the cAPs to be in CAP mode to pull the config.
This is the first problem I have. I have set up the wireless config in CAPsMAN to test the config and have found that I get around 130mb/s down. I have configured the cAP to "Home AP Dual" and tested the speed and I get around 375mb/s.
Second problem is this, I'm trying to configure the wireless with vlans. What is the limitation to how many vlans I can have on a cAP? I'm trying to have 4 vlans to segregate the network. So far my config in CAPsMAN only broadcasts 1 of the ssids I have configured for each vlan. Other Problem is that my second cAP doesn't pull any config from the server and I'm unable to provision the radios.
Also I'm not sure of the settings shown on the wireless table. I see the 2 red lines, but I'm not sure if that's an error or normal. Also the line for the actual wlan has band and Frequency that doesn't match what I've set.