Community discussions

MikroTik App
 
blingblouw
Member
Member
Topic Author
Posts: 345
Joined: Wed Aug 25, 2010 9:43 am

Cube 60Pro ac

Wed Aug 10, 2022 3:34 pm

Hi.

Just wondering how to enable channel bonding (is it supported?) on the Cube 60Pro ac?

I see there are a bunch of options (channel-bonding, beamforming, tx-power, physical-setup, etc) that are read-only that cannot be set, is this coming with a later firmware upgrade? Currently running ROS7.4.1

[admin@MikroTik] /interface/w60g> print 
Flags: X - disabled, R - running 
 0   name="wlan60-1" mtu=1500 l2mtu=1600 mac-address=11:11:11:11:11:11 
     arp=enabled arp-timeout=auto region=usa mode=bridge physical-setup=static 
     ssid="MikroTik" frequency=auto channel-bonding=off 
     default-scan-list=58320,60480,62640,64800,66960 force-freq=off password="" 
     firmware="" board-file="" mcs=0-15 beamforming=yes 
     max-tx-queued-bytes=auto tx-ring-size=4096 rx-ring-size=1024 
     tx-power=default tx-sector=auto rx-power=default 
     put-stations-in-bridge=none isolate-stations=yes 
     terragraph-peer-mac=00:00:00:00:00:00 terragraph-fw-params="" 
[admin@MikroTik] /interface/w60g> set 

<numbers> -- List of item numbers
arp -- Address Resolution Protocol
arp-timeout -- 
comment -- Short description of the item
disabled -- Defines whether item is ignored or used
frequency -- 
isolate-stations -- 
l2mtu -- 
mac-address -- 
mdmg-fix -- 
mode -- 
mtu -- Maximum Transmit Unit
name -- Interface name
password -- 
put-stations-in-bridge -- 
region -- 
scan-list -- 
ssid -- 
tx-sector -- 

 
server8
Long time Member
Long time Member
Posts: 592
Joined: Fri Apr 22, 2011 1:27 pm

Re: Cube 60Pro ac

Sat Aug 13, 2022 11:49 am

Official answer from mikrotik is needed

Who is online

Users browsing this forum: Amazon [Bot] and 29 guests